Product ID: A-613-41
Classic Bally Flipper Base

Flipper base comes with EOS bracket and pawl end stop bracket.
Choose left or right base plate from the drop-down menu above.
This base plate is used on Bally pinball machines manufactured from Hi-Deal (5/75) to Space Invaders (4/80).
Installing the coil stop & nylon flipper bushing requires self-tapping (thread cutting) #8-32 x 3/8" screws.  You can use the screws from your original flipper assembly if they have not been replaced with non-self-tapping screws in the past.  You can purchase the self-tapping screws required from the related product link at the bottom of this page.
As far as our research shows, the list below is complete, but it is just about impossible to find each and every one of these games in the field to 100% verify.  Please let us know if any inconsistencies are found.

1975-10	Hi-Deal
1975-11	Bow and Arrow
1976	Spirit of '76
1976-01	Flip Flop
1976-03	Hokus Pokus
1976-04	Old Chicago
1976-06	Aladdin's Castle
1976-06	Capt. Fantastic and The Brown Dirt Cowboy
1976-07	Freedom
1976-09	Quarterback
1976-10	Fireball
1976-11	Night Rider
1976-12	Freedom
1976-12	Hang Glider
1977	Captain Fantastic & The Brown Dirt Cowboy
1977-01	Evel Knievel
1977-02	Night Rider
1977-04	Black Jack
1977-05	Mata Hari
1977-06	Evel Knievel
1977-06	Kick Off
1977-09	Eight Ball
1978	Galaxy Ranger
1978-01	Evel Knievel
1978-01	Power Play
1978-04	Mata Hari
1978-06	Black Jack
1978-06	Strikes and Spares
1978-07	Sparkz
1978-08	Lost World
1978-10	The Six Million Dollar Man
1978-12	Playboy
1979-02	Voltan Escapes Cosmic Doom
1979-03	Supersonic
1979-04	Star Trek
1979-06	Kiss
1979-06	Paragon
1979-09	Harlem Globetrotters On Tour
1979-11	Dolly Parton
1979-12	Future Spa
1980-01	Nitro Ground Shaker
1980-02	Silverball Mania
1980-04	Space Invaders