FTYBR RGB LED board used on JJP's Wizard of Oz pinball machines.
This board is 7.5 volts.
Guidelines to Wizard of Oz Light Boards
1. There are four generations of boards
Gen 1 = 5v
Gen 2 = 7.5v
Gen 3 = 7.5v modified (has small circuit board soldered onto the light board).
Gen 4 = WOZ 2.0
2. Generation compatibility
7.5v & 7.5v modified boards can replace a 5v board, but only up to 30% of the LED boards in any given machine can be 7.5v or 7.5v Modified boards. If a higher percentage of these boards are installed, the power supply will become strained.7.5 & 7.5 modified can replace one another infinitely.5v can replace 7.5 & 7.5v infinitely.Gen 4 (WOZ 2.0) boards are not compatible with the previous three generations.
Jersey Jack Pinball #15-0018-01 & #15-000018-01.